Discover All Events

The European Society of Thoracic Surgeons (ESTS) is proud to convene the ESTS Advanced Thoracic Surgery Masterclass Exeter, hosted in Exeter, United Kingdom. Designed to serve as a high-yield educational gathering, this premier event brings together surgical consultants, clinical fellows, and trainees to explore cutting-edge methodologies in general thoracic surgery. Over three intensive days, participants will engage in expert-guided discussions, reviewing the newest clinical guidelines, technological innovations, and evidence-based practices reshaping modern patient care. The primary objective is to equip practicing clinicians with technical precision, diagnostic clarity, and state-of-the-art decision-making pathways. Comprehensive Scientific Curriculum The educational agenda spans the entire spectrum of contemporary thoracic surgical practice, balancing theoretical rigor with pragmatic clinical execution. Scientific tracks explore open access techniques, VATS lobectomy protocols, extended resections, and robotic-assisted thoracic surgery. Attendees will examine multidisciplinary diagnostic algorithms for lung cancer, mediastinal masses, chest wall pathologies, and pleural diseases. Renowned international faculty members will present deep dives into oncological staging, perioperative risk assessment, multimodal treatment plans, and post-operative care strategies aimed at minimizing surgical complications and optimizing recovery timelines. Interactive Hands-On Workshops and Simulation A key pillar of this masterclass is its focus on practical, skills-based learning. Dedicated workshop sessions allow delegates to practice complex suturing, tissue dissection, and vascular control using high-fidelity simulators and ex-vivo models under direct faculty supervision. Mentors will offer real-time guidance on troubleshooting unexpected intraoperative challenges, managing difficult conversions, and executing precise surgical maneuvers. These practical exercises aim to foster technical confidence and refine motor skills in a safe, structured environment. Keynote Addresses and Panel Debates The event features keynotes delivered by globally recognized pioneers in thoracic surgery, highlighting recent clinical trial outcomes and emerging technologies. Panel discussions will provoke rigorous debate surrounding controversial clinical scenarios, such as sublobar resection versus lobectomy for early-stage NSCLC, subxiphoid approaches, and complex airway reconstructions. Delegates will have the opportunity to participate in dynamic Q&A sessions, presenting their own challenging clinical cases for collaborative peer review and guidance. Networking and Professional Development Beyond formal educational sessions, the masterclass serves as a vibrant networking hub for the global thoracic community. Dedicated networking breaks, interactive poster sessions, and evening receptions provide ample opportunity for clinicians to establish research collaborations, share local clinical insights, and forge professional relationships. By bringing together experts and early-career surgeons, the ESTS continues its commitment to building a unified global network dedicated to advancing standards in thoracic surgical care.

The European Portable Metrology Conference (EPMC) 2026) is one of Europe’s leading specialist conferences dedicated to portable metrology, dimensional measurement, industrial inspection and 3D scanning technologies. Scheduled for 23-24 September 2026 at The International Centre, Telford, the event brings together equipment manufacturers, quality engineers, researchers, production leaders and technology innovators from across the United Kingdom and Europe. Portable metrology has become a critical capability for modern manufacturing. Industries such as aerospace, automotive, energy, rail, electronics and advanced engineering increasingly rely on high-accuracy portable measurement systems to reduce defects, shorten inspection cycles and improve process control. EPMC 2026 is designed to address these challenges through a combination of technical presentations, case studies, live demonstrations and professional networking opportunities. The conference provides a practical environment where attendees can compare technologies, discuss implementation strategies and learn directly from organizations that are using portable metrology in real production environments. Why EPMC 2026 Matters Manufacturing is undergoing rapid digital transformation. Smart factories, Industry 4.0 initiatives and data-driven quality management all depend on accurate measurement. EPMC focuses specifically on the technologies that enable measurement beyond the traditional laboratory environment. Attendees will gain insights into: Portable coordinate measuring systems Laser trackers Structured-light and laser scanning Photogrammetry Automated inspection workflows Real-time dimensional verification Digital twin integration Measurement data management These technologies help manufacturers detect deviations earlier, reduce scrap, improve traceability and maintain compliance with increasingly stringent quality standards. Conference Program EPMC 2026 is expected to feature a two-day technical program combining keynote sessions, expert presentations and application-focused discussions. Keynote Presentations Industry leaders and technology experts will present the latest developments in: Large-volume measurement High-accuracy alignment Portable CMM innovation AI-assisted inspection Measurement automation Digital manufacturing integration These sessions are intended to provide strategic insight into where portable metrology is heading over the next decade. Technical Sessions The technical program will focus on real-world implementation and measurable business outcomes. Topics are expected to include: Aerospace assembly verification Automotive body measurement Turbine and energy-sector inspection Reverse engineering workflows GD&T validation Calibration and uncertainty management Inline and near-line inspection Metrology software interoperability Presentations will typically include case studies, accuracy data, workflow comparisons and lessons learned from industrial deployments. Live Technology Demonstrations One of the strongest features of EPMC is the opportunity to see equipment operating in person. Expected demonstration areas include: Laser tracking systems Handheld 3D scanners Portable articulated arms Optical measurement systems Alignment and leveling equipment Surface analysis tools Inspection software platforms Live demonstrations allow attendees to evaluate ease of use, measurement speed, setup requirements and integration capabilities before making investment decisions. Exhibition Area Alongside the conference sessions, EPMC includes a dedicated exhibition showcasing the latest metrology hardware and software solutions. Exhibitors are expected to represent: Measurement equipment manufacturers Calibration providers Industrial software companies Automation and robotics specialists Quality assurance solution providers Research institutions and technical partners The exhibition enables direct conversations with suppliers, product specialists and application engineers. Who Should Attend EPMC is designed for professionals involved in measurement, quality and advanced manufacturing. Recommended attendees Metrology engineers Quality managers Manufacturing engineers Production managers Process improvement specialists R&D engineers Automation engineers Calibration professionals Academic researchers Technical consultants Whether an organization is evaluating its first portable measurement system or expanding a mature digital inspection program, the conference provides relevant technical and commercial insight. Benefits for Manufacturing Organizations Improve Inspection Efficiency Portable systems can significantly reduce the time required to measure large or complex components, enabling faster production feedback. Reduce Rework and Scrap Early detection of dimensional deviations helps prevent costly downstream defects. Support Industry 4.0 Modern metrology platforms generate digital data that can feed manufacturing execution systems, statistical process control and digital twin environments. Enhance Traceability Accurate measurement records support customer requirements, regulatory compliance and audit readiness. Accelerate Problem Solving Engineers can perform measurements directly on the shop floor, reducing delays associated with moving components to a dedicated inspection laboratory. Networking Opportunities EPMC is also a major networking event for the metrology community. Attendees can connect with: Equipment manufacturers Quality leaders Research organizations Systems integrators Automation providers Industrial end users Academic experts Technical consultants Structured breaks, exhibition sessions and informal discussions provide opportunities to exchange ideas, benchmark practices and build long-term professional relationships. Research and Innovation A significant portion of the conference is expected to focus on emerging research and next-generation measurement techniques. Areas of growing interest include: AI-driven defect detection Automated point-cloud analysis Robotic scanning systems Real-time process compensation Cloud-based metrology workflows Predictive quality analytics Hybrid optical/contact measurement High-speed inline inspection These developments are increasingly important as manufacturers seek to combine precision measurement with automation and data intelligence. Venue Advantages – The International Centre, Telford The International Centre is one of the UK’s established conference and exhibition venues for industrial and engineering events. Advantages Large exhibition halls Modern conference facilities On-site catering Easy motorway access Rail connectivity via Telford Central Accommodation options nearby Space for live equipment demonstrations Its location in the West Midlands makes it accessible for attendees traveling from major UK manufacturing regions including the Midlands, North West, South Wales and the South East. Travel Information By Rail Telford Central station is located close to the venue and offers connections to Birmingham and other major UK rail routes. By Road The venue is easily accessible from the M54 motorway, with convenient access for visitors traveling by car. By Air International visitors can reach Telford via Birmingham Airport, followed by rail or road transfer. Registration Information EPMC 2026 is listed as a paid conference. Registration is expected to provide access to: Conference sessions Keynote presentations Technical papers Exhibition area Networking activities Refreshments during scheduled breaks Prospective attendees should use the official EPMC website for registration, pricing and participation updates. Official website: www.epmc.events Why Attend EPMC 2026? Organizations attending EPMC 2026 can expect: Exposure to the latest portable metrology technologies Practical implementation guidance Direct access to suppliers and experts Benchmarking against industry best practices Insight into future measurement trends Opportunities for collaboration and partnership For companies focused on precision manufacturing, quality assurance and digital industrial transformation, EPMC 2026 represents a valuable opportunity to evaluate technologies, strengthen professional networks and gain actionable knowledge that can be applied directly to production and inspection operations.

The Annual NDT Industry Forum, hosted at the prestigious Newton Building, serves as the cornerstone event for the UK’s non-destructive testing community. This event focuses on the strategic alignment between global ICNDT standards and local UK industrial practices. Spanning two full days, the forum brings together a 600-word deep dive into the evolving landscape of inspection technologies. The primary focus of the 2026 session is the integration of "NDT 4.0" within the manufacturing hubs of the East Midlands. Attendees will engage in high-level discussions regarding the digital transformation of traditional testing methods, such as ultrasonic and radiographic testing, into automated, data-driven systems. The first day is dedicated to policy and certification. As the ICNDT pushes for global harmonization of personnel certification (ISO 9712), this forum provides a localized platform to discuss how UK practitioners can maintain competitive edges in the international market. Keynote speakers from the University of Northampton’s engineering faculty will present findings on the reliability of automated inspection in high-stress environments. Day two shifts toward practical applications and "Condition Monitoring." Live demonstrations will be conducted in the specialized laboratories, showcasing the latest in Phased Array Ultrasonic Testing (PAUT) and pulsed thermography. The event also features a dedicated "Student and Apprentice Zone," where the next generation of NDT engineers can interact with industry veterans. This interaction is vital for addressing the current skills gap in the industrial engineering sector. By fostering a collaborative environment, the forum ensures that theoretical research from the ICNDT’s global network is successfully translated into shop-floor solutions for aerospace, energy, and civil infrastructure.